BNWAS

Net-Logic is proud to be able to offer the world’s first Type Approved wireless BNWAS - WatchKeeper+.

 

WatchKeeper+ allows the ship operator to avoid extensive new cabling associated with traditional wired BNWAS by making use of a highly fault tolerant radio frequency mesh network, controlling information flow around the vessel. Cabling is minimised and vessel disruption and downtime is drastically reduced.

 

 

The WatchKeeper+ is a Bridge Navigation Watch Alarm Systems (BNWAS) and is Type Approved by the MCA and meets the requirements of IEC 62616. It conforms to performance standards set by the MSC.128(75).

Note: Batteries for remote modules should be changed every 2 years, Please contact GlobalView Systems Ltd or your local service centre for a quotation and servicing advice.

contact@globalviewsystems.co.uk

0044 1482 772536

WATCHKEEPER BNWAS

A BNWAS is a dead man’s alarm system with the puropse of ensuring the officer on watch is alert and competent to carry out his duties. It is, in effect, a timer which counts down and alerts other navigation personnel if it is not re-set within a certain time period.

 

The timer counts down a preset period, usually 12 minutes and when approaching the end of this period generates a visual warning on the bridge to reset the timer by pressing a button. If this warning is not acknowledged the system then triggers an audible alarm on the bridge (referred to as the First Stage alarm). If this alarm is also not acknowledged then the system will generate audible & visual alarms in the Captain’s cabin and/or the designated back-up Navigation Officer’s cabin (Second Stage alarm) to indicate that they need to go to the bridge. If the alarm is still not acknowledged then further alarms are raised in the crew’s mess and other shared recreational areas (Third Stage alarm).

CHOOSING THE CORRECT 
BNWAS

 

Choosing the right BNWAS is simple. All you need to do is browse our selection of Bridge Navigation Watch Alarm Systems, compare the benefits of each system against your ship or fleet's specific requirements and challenges, and then place an order with us using our online quote request form.

You're also free to benefit from our years of hands-on BNWAS experience.

 

Simply contact us, and we'll be happy to discuss your specific requirements.

 

APPROVALS

WatchKeeper+ meets fully the requirements of IEC62616 and fully conforms to MSC.128(75) performance standards.
 
The WatchKeeper+ BNWAS carries the prestigious Wheel Mark certification along side United States Coast Guard Approval.
Please see our support page for latest Declaration of Conformiity and approval certificates.
 
 
 

NEED BNWAS SUPPORT?
CLICK BELOW TO ACCESS THE SUPPORT CENTRE

CONTACT


Unit 3, St Mark Street, Hull, HU8 7FB

Tel: +44 (0)1482 319489

 

Mail: contact@net-logic.co.uk

 

© 2015. GLOBALVIEW SYSTEMS LTD

Master Control Unit [MCU]

WatchKeeper+ features a 3.2" full colour LCD touchscreen control unit with built in first stage alarm and reset function